Friday, September 17, 2010

Some Windows OS Tips&Tricks

Internet Explorer: Clear your drop down address bar
Is your drop down address bar full of old addresses that you will never use again? Mine isn't, because I have fixed
that problem by getting rid of them. Want to know how? Then keep reading.
Warning: This tip involves entering the registry. If at any point you get confused or are not completely sure what
I mean, STOP , and re-read the steps to make sure you are doing this exactly right. If followed correctly these
procedures are completely safe. I would also not recommend messing around in the registry unless you know
what you are doing.
First click the Start button. Then click on Run . Enter " regedit " (no quotes), and click OK . This will bring up the
registry editor.


Under the My Computer directory open the HKEY_CURRENT-USER directory by double clicking it.
Next open the Software directory in the same way. Under the Software directory open the Microsoft directory.
Under Microsoft open the Internet Explorer directory. Under the Internet Explorer directory, open the TypedURLs
directory.
Now the section on the right will be filled with a bunch of text that at first may seem rather meaningless, and
the address below will be displayed at the bottom of the Window:
" My Computer\HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\TypedURLs "


If this is the case you are in the right place. If not, go back and make sure you have followed the steps correctly.
All the entries in the right are actually just a list of all the address you have entered. You can now click on any
entry and press delete to get rid of it. For each one you delete you must confirm that you want to delete it by
clicking yes in the box that appears. If it is easier for you, you can delete multiple entries at once by selecting
them using either a box or the control key.
When you are finished simply close the registry editor window. (Unless you want to see something else you can
do in the registry which is explained below) All those useless URLs are gone! Whenever that address bar gets full
again, just do the same thing.
Since we are here in the registry let's change the message in the title bar of Internet Explorer. Just go back to
the Main directory under the Internet Explorer directory. Now there is some more stuff in that right window.
Scroll to the bottom and look for an entry entitled " window title " double click it to change its value.
Enter the text you want to be displayed in the title bar, and click OK . Now you can close the registry editor. If
there was no entry named " window title " you can make one. Click on Edit , go to new , and click on " String
Value ." Name it window title and set the value as indicated above.


Now open Internet Explorer and you can see your text in the title bar, and all those old addresses are gone
How to use free internet using Airtel Mobiles Requirements:
------>A mobile with GPRS Modem
------>A new AIRTEL SIM Proceedure:
Send a message by typing " MO to 2567" now u will recieve the settings and save them Now Send a
message by typing "INTERNET ON to 121" and now u will recieve a message of conformation.
Switch off and switch on u r mobile now u r phone is ready for using internet This service charges
RS.15/- per 24hrs to stop internet type "INTERNET OFF to 121" The main Cheat is here "See that u r
balance is not more than RS 10 then Airtel will not deduct any amount for the service" Recharge u r
mobile every month with RS 99/- such that u will get RS 0 and a validity of one month U can enjoy
internet with a speed of 128kBPS when the mobile is connected to system via Datacable or Blue tooth
Type: IM R yournameSend to 8888example IM R sumitsend to 8888.
okthan u will receive sms .
u be will charged 3 Rs.for one time only for registration.
now i u want to send sms to ur friend for free.
suppose ur friend number is 9896098960 than go to create message type 8888919896098960.
u will not be charge ,enjoy i have tested on delhi and haryana network.
Note:- For std number dont apply zero before number.
Dont forget to hit the reputation button.


How to make your Desktop Icons Transparent
Are you bothered with your desk top icon's background, is not clear?
No problem, solution here.
Go to
• Control Panel
• System
or right click on
• My Computer
• select "Properties"
• Advanced
• Performance area
• Settings button Visual Effects tab
• selet the check box "Use drop shadows for icon labels on the Desktop"
and click Apply, OK


Remove or Rename the Recycle Bin from the Desktop
If you don't use the Recycle Bin to store deleted files , you can get rid of its desktop icon all together.
• As a precaution, if you have fear about registry, just copy the registry file "regedit.exe" from "C:\Windows\"
folder and past anywhere of your place.
• Run Regedit and go to:
HKEY_LOCAL_MACHINE/SOFTWARE/ Microsoft/ Windows/CurrentVersion/explorer/ Desktop/NameSpace
• Then search for the string value "Recyclebin".
• Click on the "Recycle Bin" string in the right hand pane.
• Hit Del, click OK.
If you want to restore, just copy the registry file from your folder where you saved before and past to
"C:\Windows\". then restart the computer.
How to Rename the Recycle Bin
• To change the name of the Recycle Bin desktop icon, open Regedit and go to:
• HKEY_CLASSES_ROOT/CLSID/ {645FF040-5081-101B-9F08-00AA002F954E}
• It is very difficult to find the code, right?
No problem, u just copy the code and click to select edit>find; from Menu bar and past to findand by right click
on "Recycle Bin"and select modify option for change the name to whatever you want (don't type any quotes).
• Eg:- find this code - 645FF040-5081-101B-9F08-00AA002F954E


Speed up Firefox
Here's something for broadband people that will really speed Firefox up:
• Type "about:config" into the address bar and hit return. Scroll down and look for the following entries:
network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests
Normally the browser will make one request to a web page at a time. When you enable pipelining it will make
several at once, which really speeds up page loading.
• Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
Set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at
once.
• Lastly right-click anywhere and select New-> Integer. Name it "nglayout.initialpaint.delay" and set its value to
"0". This value is the amount of time the browser waits before it acts on information it recieves.
If you're using a broadband connection you'll load pages MUCH faster now..


Add a program to the Right Click Menu
So as to Use it Everywhere by just doing a Right-Clicking
When you right click on any folder, you can have access to that application, the same as using Sent To and New.
Open Registry Editor.
Navigate and choose:
HKEY_CLASSES_ROOT\Folder\shell.
Add a new Key to the "Shell" Key and name it anything you like. Give it a default value that will appear when you
right click a folder, i.e. NewKey (use an "&" without the quotes, in front of any character and it will allow you to
use the keyboard).
Navigate and click on the registry key
HKEY_CLASSES_ROOT\Folder\shell\NewKey.
Now you have to add a New Key named Command and Set the (Default) value of the application you want to run.
For example:
c:\program files\internet explorer\iexplore.exe
(Include the full path)


Change Logon Wallpaper-Windows XP
Logon wallpaper is the wallpaper or image that windows xp shows on screen when windows logs on (before it
asks for username & password) .
It’s usually set to the image-logo of the brand (manufacturer) of our computer (e.g. in compaq laptops).
Now we can set it to our own image or any other image (any bmp file) by following trick
Open Startmenu
->Run type regedit and press ok to open registry editor. (shows a tree like structure of directories at left)
In that hierarchical structure in left, navigate to registry entry
HKEY_USERS\.DEFAULT\Control Panel\Desktop
In right side pane see a number of values placed in a table format.
choose the value named Wallpaper from there and double click it.
Now you see a box with value name as Wallpaper and value data as Path to the image file .
There give the full path of the image (bmp file) which you want to set as logon wallpaper by deleting previous
path and writing path to your bmp file e.g.
C:\WINDOWS\lon.BMP (to set image lon.BMP file as log on wall paper).
Also double click on WallpaperStyle and change it’s value to 2 to get a stretched wallpaper at logon.
Put that bmp file in windows directory for better results.If that is a jpeg file, convert to bmp file by opening in
Windows Image Viewer and save as bmp.


Hiding Drives in XP
• Go to Start > run > type "diskpart".(Without Quote)a dos window will appear with following prompt.
DISKPART>
• Then type "list volume" this will look like it
Volume### Ltr Label Fs Type Size Status Info
-------------- ---- ------ --- ----- ---- ------- --
Volume 0 F DC-ROM
Volume 1 C NTFS Partition 7000MB Healthy
Volume 2 D soft NTFS Partition 8000MB Healthy
Volume 3 E ---- NTFS Partition 8000MB Healthy
• If u wanna hide drive E then type "select volume 3"then a message will appear in same winwods { Volume 3 is
the selected volume}
• Now type " remove letter E" now a message will come { Diskpart Removed the Drive letter }sometime it
requires the reboot the computer .
• Diskpart will remove the letter .Windows XP is not having capabilty to identify the unkown volume.
Don afraid ur Data will remain same . To Come backe the Drive repeat the process . but in 4th step whish is
shown in this post replace " remove" to "assign"i mean type " assign letter E"
if we hide the drives using this method then even administrator is not allowed to access that drive all the
programs stored in that drive will not run so there is one more way to hide the drives for specific users
WINDOWS REGISTRY
go to Registry editor
HKEY_USERS or HKEY_LOCAL_MACHINE
(in you want to hide drive for all users)
then go to ....
• Software
• >> Microsoft
• >> Windows
• >> CurrentVersion
• >> Policies
• >> Explorer
in right plane create new DWORD value and name it as NoViewOnDrive and set it's value to the number of drive
you want to hide
A: 1
B: 2
C: 4
D: 8
E: 16
F: 32
G: 64
H: 128
n so on ...
to hide all drives type - 67108863


Double click opens search option
Double-clicking any drive opens search option
Solution 1:
That's a virus named as ravmon.exe and autorun.infScan first with a good antivirus [Nod32 Recommanded]then
try this trick....
First show the hidden files and folders options then try this method
• Go to Start-->run and type cmd then click ok.
• If u want to remove the infected file from c drive then type C: in command prompt and press enter.
• Type autorun.inf and press enterautorun.inf file is opened.
• Now type "attrib autorun.inf -s -h -r" and press enter.
• Now delete the file by typing"del autorun.inf" and press enter.
• Now type autorun.inf and press enter now, u will find no infected autorun.inf file..
• same way do for all other drives then restart ur pc
Solution 2:
To resolve this problem, edit the registry to set the value data for the Default string value in the registry keys
that are described in the "Cause" section of this article to none:
• Start Registry Editor (Regedt32.exe).
• Locate and then click the Default value under the following keys in the registry if this problem occurs with
folders:HKEY_CLASSES_ROOT\Directory\shellIf this problem occurs with
drives:HKEY_CLASSES_ROOT\Drive\shell.
• Click Modify on the Edit menu.
• Type none in the Value data box, and then click OK.
• Quit Registry Editor.
Thats all :)


1 of the 100 Xp hidden fact
Create a new folder with the name ABC
(of course you can give any name).
Open the command prompt and rename it to one of the following:
• .{20D04FE0-3AEA-1069-A2D8-08002B30309D} (= My Computer)
• .{450D8FBA-AD25-11D0-98A8-0800361B1103} (= My Documents)
• .{208D2C60-3AEA-1069-A2D7-08002B30309D} (= My Network Places)
• .{645FF040-5081-101B-9F08-00AA002F954E} (= Recycle Bin)
• .{871C5380-42A0-1069-A2EA-08002B30309D} (= Internet Explorer)
• .{21EC2020-3AEA-1069-A2DD-08002B30309D} (= Control Panel)
• .{D20EA4E1-3957-11D2-A40B-0C5020524153} (= Administrative Tools)
• .{00020D75-0000-0000-C000-000000000046} (= Inbox)
• .{D20EA4E1-3957-11D2-A40B-0C5020524152} (= Fonts)
• .{7007ACC7-3202-11D1-AAD2-00805FC1270E} (= Network Connections)
• .{2227A280-3AEA-1069-A2DE-08002B30309D} (= Printers and Faxes)
• .{7BE9D83C-A729-4D97-b5A7-1B7313C39E0A} (= Programs Folder)
• .{E211B736-43FD-11D1-9EFB-0000F8757FCD} (= Scanners and Cameras)
• .{D6277990-4C6A-11CF-8D87-00AA0060F5BF} (= Scheduled Tasks)
• .{48E7CAAB-B918-4E58-A94D-505519C795DC} (= Start Menu Folder)
• .{7BD29E00-76C1-11CF-9DD0-00A0C9034933} (= Temporary Internet Files)
• .{BDEADF00-C265-11d0-BCED-00A0C90AB50F} (= Web Folders)
• .{6DFD7C5C-2451-11D3-A299-00C04F8EF6AF} (= Folder Options)
• .{00020801-0000-0000-C000-000000000046} (= Folder)
• .{00021400-0000-0000-C000-000000000046} (= Another Folder)
Important: include the point and nothing before that!
Example: "rename ABC .{20D04FE0-3AEA-1069-A2D8-08002B30309D}"
Now wen you will see that the icon of tht folder has changed (No name) to My computer Icon.Now Make a
shortcut to that folder, change the target and icon and you have a nameless shortcut.
Hidden Star Wars Movie in 'Windows XP'


Hidden star wars movie in XP
Well, dis is an old trick...
juz info 4 those who don't know..
Microsoft has hidden a version of Star Wars done entirely with ASCII characters in the Windows XP operating
system.
But you must be connected to internet to view it.
When online,
go to
• start
• ->run.....
• Now type 'telnet towel.blinkenlights.nl' without the single quotes.
• See it for yourself.
ENJOY!!!


Play Video On desktop !!
start any video on any player in full screen...
Then take print screen of video..
then GO
• start mean
• >>> all programs
• >>> Accessories
• >>> Paint
paste dat pic on paint...
go to save as & save dis pic in PNG format then save dis pic in ur desktop...
video wll play on ur desktop!!!


Trick to Show ur name after time in taskbar...
I m here to tell u a trick to add up ur name in place of AM and PM beside time and make urself to feel proud
among ur group of frnds.
Its simple
• Start
• -> Control Pannel
• -> Regional and LAnguage option
• -> Customize (beside English US)
• -> Go to TIME tab
• -> Change AM symbol and PM symbol from AM and PM to ur name
• -> Apply
• -> Ok ...
IS it changed ???
Might be not ...Now go to time in taskbar and Double Click it to open "Date and time property" ...Look place
where time chnges in digital form i.e. 02:47:52 AM , click to arrow to cnage the AM or PM by selecting and press
arrow. It will Show ur name or name that was entered by u, Apply -> OK
and be HAPPY 8-)


Run is disabled by adminstrator
Following is the key which is responsible for it to work or not Work
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explore
OR
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System
Look for 'NoRun' its a DWORD with default value of 00000000 (0).In your case it
could have been changed.Change it to original default value...!
Steps:
• Open Run n type gpedit.msc n hit enter...!
• Go to the left pannel : "User Configuration > Administrative Templates > Start Menu and Taskbar > ".
• Towards ur right u'll find several options ....serach for.."Remove Run menu from Startmenu"...!
• Disable it and if it is already set as not configured , enable it and then disable it .. !
• U r now done....!


Folder Options Disabled
go to run
type "control folders"
if it doesnt work, try:
Solution 1:
• ->Run -> Type gpedit.msc Then
• ->User Configuration ->Administrative Templates --> Windows Components
• --> Windows Explorer-> Removes the Folder Options menu item from the Tools menu.
• Right click: -> Properties -> Disable ->Apply -> Again set it to not configured
Solution 2:
Go to Startmenu->Run and enter regedit there and press ok to execute regedit (registry editor).
There you’ll see a tree like structure of folders like stuff in left. There navigate to registry
entry
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
and on right side you’ll see many values.
Out of these values in right see a value (key) named “NoFolderOptions” .Double click after
highlighting it, if there under value box it’s written 1 then change it to 0 and press enter. Exit
the registry editor and close any folder and open again to see the settings.If you want to disable
Folder Options then set the value of “NoFolderOptions” to 1 (and to retrieve it back change it
to 0).

Print this post

No comments: